Cut walk time across your facility.
The TexTrack™ modular standing scooter moves your people and materials across warehouses and plant floors — swap attachments for the job, cover more ground in less time, and take the daily miles off your crew's legs.
Designed & assembled in the USA · Patent pending · US support · Financing available
Two 36V UL-rated batteries on every unit
Every unit ships with two 36V UL Rated Cell Battery packs — not one. Run both onboard at once and the unit doubles its run time in a single stretch, or keep one on the deck and the other on the charger for round-the-clock swapping. Either way the packs lift in and out in seconds with no tools.
25″ × 25″ Deck
250 W motor| Duty cycle | 1 pack | 2 onboard |
|---|---|---|
| Typical warehouse duty Stop-and-go picking, coasting, idle between runs | 10.1 hrs | 20.2 hrs |
| Heavy duty Loaded deck, ramps, longer continuous pulls | 7.3 hrs | 14.5 hrs |
| Continuous at full load Motor held at rated output — a worst case, not a shift | 3.6 hrs | 7.2 hrs |
The 250 W drive pulls roughly 7 A at 36 V. One pack clears a full shift on most indoor routes; both packs onboard take it past twenty hours.
35″ × 35″ Deck
500 W motor| Duty cycle | 1 pack | 2 onboard |
|---|---|---|
| Typical warehouse duty Stop-and-go picking, coasting, idle between runs | 5.2 hrs | 10.4 hrs |
| Heavy duty Loaded deck, ramps, rough outdoor concrete | 3.6 hrs | 7.3 hrs |
| Continuous at full load Motor held at rated output — a worst case, not a shift | 1.8 hrs | 3.6 hrs |
The 500 W drive pulls roughly 14 A at 36 V. It carries more load over rougher ground and draws more doing it — which is why running both packs onboard is the difference between half a shift and a full day.
Two packs onboard, double the run time
Both packs can ride on the unit at the same time. Mounted together they simply double the run time — the figures in the right-hand column above are what one vehicle does on a single charge cycle, no swap needed. For operations that never stop, run one pack onboard and keep the other in a charging vault, then exchange them in seconds. Same two packs, two ways to use them: double the shift, or never park the vehicle.
Runtime figures are engineering estimates based on a 36V UL-rated pack at 1,008 Wh with 90% usable capacity, at the average draw shown for each duty cycle. Dual figures assume both packs mounted onboard on the same charge cycle. Actual run time varies with operator weight, load, floor surface, grade, ambient temperature, and pack age. Continuous full-load figures are a worst case for comparison — no warehouse route holds a drive motor at rated output for hours.
Move your people, not just your product
The most versatile lightweight modular scooter on the market, with the tightest turn radius on the market — built to take the daily miles off your crew and put them into the work that matters.
Modular by Design
One scooter, many jobs. Swap attachments in seconds to carry tools, parts, and materials wherever they need to go. Patent pending.
Tightest Turn Radius on the Market
Zero-degree turning means it pivots in place at the end of an aisle instead of backing up and re-approaching — and the light frame fits aisles and mezzanines heavier carriers are spec'd out of.
Cover More Ground
Large facilities mean miles of walking every shift. Riding instead of walking gets your team where the work is — faster.
Lower MSK Injury Costs
Less walking, pushing, and hauling means less strain on knees, backs, and feet — and fewer musculoskeletal claims.
Made & Assembled in the USA
Built domestically through an ISO 9001:2015 certified supplier network — which keeps wear parts stocked in the US and makes Buy American and federal procurement paperwork straightforward.
Two 36V Swappable Batteries, Included
Every unit ships with two UL-rated 36V packs, not one. Mount both onboard and the unit runs twice as long on a single charge cycle — about 20 hours on the 250 W unit and 10 on the 500 W — or keep one on the charger and swap in seconds. Cell documentation available for your safety team.
Built for Plant Floors
Industrial-grade construction made for concrete, dock plates, and daily shift work — not sidewalk duty.
Parts on the Shelf
Replacement parts and attachments in stock in the US, so a worn part never sidelines your fleet for weeks.
Custom Attachments
Have a job the standard lineup doesn't cover? We design and build custom attachments around your workflow — your scooter, your spec.
Choose. Ride. Repeat.
Choose your configuration
Pick the scooter, the deck size, and the attachments that fit your workflows — or tell us the job and we'll spec it for you.
Delivered ready to ride
Your scooter arrives set up for your facility, with parts and attachments available whenever you need them.
Your team moves faster
Techs, supervisors, and pickers cover the facility in a fraction of the time — every shift, every day.
Charge lithium-ion where it can't reach your racking.
Removable packs mean the charge cycle doesn't have to happen on a shelf next to your stock. Our fire-resistant charging vaults add smoke detection, automatic power shutoff, and ventilated cooling — and give your safety team one documented place for every battery in the building.
Fire-resistant steel · Smoke detection · Automatic power shutoff · Optional Hafex® aerosol suppression
One scooter, every job
Start with the scooter, add the attachments your workflows need — and keep it running with parts on the shelf.
Modular Warehouse Scooter
The electric standing scooter built for industrial facilities — the core of the TexTrack™ transport lineup. Available with a 25″ × 25″ deck on a 250 W drive or a 35″ × 35″ deck on a 500 W drive.
Attachments
Swappable attachments that turn the scooter into a material hauler, tool carrier, and more.
Replacement Parts
US-stocked wear parts and spares, UPS-boxable for fast replacement — so a worn part never takes a scooter out of service.
Questions, answered
Yes — we offer a paid pilot program so you can prove out the scooter in your own facility before committing, and rentals are available for select equipment.
Both. The scooter is modular — swap on the right attachment and it carries tools, parts, and materials along with the rider.
Warehouses, manufacturing plants, and distribution centers — anywhere your team burns time and energy walking long distances indoors.
Designed and assembled in the USA through an ISO 9001:2015 certified domestic supplier network. That keeps replacement parts stocked in the US and lets a common wear part ship overnight rather than sit in a container. The modular design is patent pending.
Two standard sizes. The 25″ × 25″ deck runs a 250 W motor and threads tight aisles and mezzanines. The 35″ × 35″ deck runs a 500 W motor and carries a wider container footprint over rough and outdoor ground. Non-standard dimensions can be produced to spec at the manufacturing stage.
On typical warehouse duty, the 250 W 25″ × 25″ unit runs about 10 hours on one 36V UL-rated pack and the 500 W 35″ × 35″ unit about 5 hours. Every unit ships with two packs, and both can run onboard at the same time — which doubles those figures to roughly 20 and 10 hours on a single charge cycle. You can also run one pack and keep the other charging, then swap in seconds.
Yes — flexible plans and pricing are available, including rental and financing options. Reach out and we'll put together a structure that fits your budget.
TexTrack™ stocks replacement parts and attachments in the US, so a worn tire or part never sidelines your scooter for weeks.